|
ESO (1) |
Reference and title of the harmonised standard (and reference document) |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
| Cenelec |
EN 41003:1998 Particular safety requirements for equipment to be connected to telecom munication networks |
EN 41003:1996 Note 2.1 |
Date expired (1.1.2002) |
| Cenelec |
EN 41003:2008 Particular safety requirements for equipment to be connected to telecom munication networks and/or a cable distribution system |
EN 41003:1998 Note 2.1 |
1.7.2011 |
| Cenelec |
EN 50063:1989 Safety requirements for the construction and the installation of equip ment for resistance welding and allied processes |
||
| Cenelec |
EN 50065-4-2:2001 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz -- Part 4-2: Low voltage decoupling filters - Safety requirements |
||
| EN 50065-4-2:2001/A1:2003 | Note 3 |
Date expired (1.12.2005) |
|
| EN 50065-4-2:2001/A2:2005 | Note 3 |
Date expired (1.3.2008) |
|
| Cenelec |
EN 50065-4-7:2005 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz -- Part 4-7: Portable low voltage decoupling filters - Safety requirements |
||
| Cenelec |
EN 50085-1:1997 Cable trunking systems and cable ducting systems for electrical installa tions -- Part 1: General requirements |
||
| Cenelec |
EN 50085-1:2005 Cable trunking systems and cable ducting systems for electrical installa tions -- Part 1: General requirements |
EN 50085-1:1997 Note 2.1 |
Date expired (1.7.1999) |
| Cenelec |
EN 50085-2-1:2006 Cable trunking systems and cable ducting systems for electrical installa tions -- Part 2-1: Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings |
||
| Cenelec |
EN 50085-2-2:2008 Cable trunking systems and cable ducting systems for electrical installa tions -- Part 2-2: Particular requirements for cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor |
||
| Cenelec |
EN 50085-2-3:1999 Cable trunking systems and cable ducting systems for electrical installa tions -- Part 2-3: Particular requirements for slotted cable trunking sys tems intended for installation in cabinets |
||
| Cenelec |
EN 50085-2-4:2009 Cable trunking systems and cable ducting systems for electrical installa tions -- Part 2-4: Particular requirements for service poles and service posts |
||
| Cenelec |
EN 50086-1:1993 Conduit systems for cable management -- Part 1: General requirements |
|
ESO (1) |
Reference and title of the harmonised standard (and reference document) |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
| Cenelec |
EN 50086-2-4:1994 Conduit systems for cable management -- Part 2-4: Particular require ments for conduit systems buried underground |
||
| EN 50086-2-4:1994/A1:2001 | Note 3 |
Date expired (1.8.2003) |
|
| Cenelec |
EN 50090-2-2:1996 Home and Building Electronic Systems (HBES) -- Part 2-2: System over view - General technical requirements |
||
| EN 50090-2-2:1996/A1:2002 | Note 3 |
Date expired (1.8.2004) |
|
| EN 50090-2-2:1996/A2:2007 | Note 3 | 1.11.2011 | |
| Cenelec |
EN 50106:1997 Safety of household and similar electrical appliances - Particular rules for routine tests referring to appliances under the scope of EN 60335-1 and EN 60967 |
HD 289 S1:1990 + A1:1992 Note 2.1 |
Date expired (1.4.1999) |
| EN 50106:1997/A1:1998 | Note 3 |
Date expired (1.7.1999) |
|
| EN 50106:1997/A2:2001 | Note 3 |
Date expired (1.8.2003) |
|
| Cenelec |
EN 50106:2008 Safety of household and similar electrical appliances - Particular rules for routine tests referring to appliances under the scope of EN 60335-1 |
EN 50106:1997 and its amendments Note 2.1 |
1.6.2011 |
| Cenelec |
EN 50117-1:2002 Coaxial cables -- Part 1: Generic specification |
||
| EN 50117-1:2002/A1:2006 | Note 3 |
Date expired (1.7.2009) |
|
| Cenelec |
EN 50117-2-1:2005 Coaxial cables -- Part 2-1: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz – 1 000 MHz |
||
| EN 50117-2-1:2005/A1:2008 | Note 3 | 1.12.2010 | |
| Cenelec |
EN 50117-2-2:2004 Coaxial cables -- Part 2-2: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operat ing at 5 MHz – 1 000 MHz |
||
| EN 50117-2-2:2004/A1:2008 | Note 3 | 1.12.2010 | |
| Cenelec |
EN 50117-2-3:2004 Coaxial cables -- Part 2-3: Sectional specification for cables used in cabled distribution networks - Distribution and trunk cables for systems operating at 5 MHz – 1 000 MHz |
||
| EN 50117-2-3:2004/A1:2008 | Note 3 | 1.12.2010 | |
| Cenelec |
EN 50117-2-4:2004 Coaxial cables -- Part 2-4: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz – 3 000 MHz |
||
| EN 50117-2-4:2004/A1:2008 | Note 3 | 1.12.2010 | |
| Cenelec |
EN 50117-2-5:2004 Coaxial cables -- Part 2-5: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operat ing at 5 MHz – 3 000 MHz |
||
| EN 50117-2-5:2004/A1:2008 | Note 3 | 1.12.2010 |
|
ESO (1) |
Reference and title of the harmonised standard (and reference document) |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
| Cenelec |
EN 50117-3-1:2002 Coaxial cables -- Part 3-1: Sectional specifications for cables used in Tele com applications - Miniaturized cables used in digital communication systems |
||
|
Cenelec |
EN 50117-4-1:2008 Coaxial cables -- Part 4-1: Sectional specification for cables for BCT cabling in accordance with EN 50173 - Indoor drop cables for systems operating at 5 MHz – 3 000 MHz |
||
|
Cenelec |
EN 50146:2000 Cable ties for electrical installations |
||
|
Cenelec |
EN 50156-1:2004 Electrical equipment for furnaces and ancillary equipment -- Part 1: Requirements for application design and installation |
||
|
Cenelec |
EN 50178:1997 Electronic equipment for use in power installations |
||
|
Cenelec |
EN 50194:2000 Electrical apparatus for the detection of combustible gases in domestic premises -- Part 1: Test methods and performance requirements |
||
|
Cenelec |
EN 50194-1:2009 Electrical apparatus for the detection of combustible gases in domestic premises -- Part 1: Test methods and performance requirements |
EN 50194:2000 Note 2.1 |
1.9.2011 |
|
Cenelec |
EN 50214:2006 Flat polyvinyl chloride sheathed flexible cables |
HD 359 S2:1990 + EN 50214:1997 Note 2.1 |
Date expired (1.10.2008) |
|
Cenelec |
EN 50250:2002 Conversion adaptors for industrial use |
EN 50250:1998 Note 2.1 |
Date expired (1.7.2005) |
|
Cenelec |
EN 50262:1998 Cable glands for electrical installations |
||
|
EN 50262:1998/A1:2001 |
Note 3 |
Date expired (1.4.2003) |
|
|
EN 50262:1998/A2:2004 |
Note 3 |
Date expired (1.10.2007) |
|
|
Cenelec |
EN 50266-1:2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables -- Part 1: Apparatus |
HD 405.3 S1:1993 Note 2.1 |
Date expired (1.8.2002) |
|
Cenelec |
EN 50266-2-1:2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables -- Part 2-1: Procedures - Category A F/R |
HD 405.3 S1:1993 Note 2.1 |
Date expired (1.8.2002) |
|
Cenelec |
EN 50266-2-2:2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables -- Part 2-2: Procedures - Category A |
HD 405.3 S1:1993 Note 2.1 |
Date expired (1.8.2002) |
|
Cenelec |
EN 50266-2-3:2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables -- Part 2-3: Procedures - Category B |
HD 405.3 S1:1993 Note 2.1 |
Date expired (1.8.2002) |
|
ESO (1) |
Reference and title of the harmonised standard (and reference document) |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
| Cenelec |
EN 50266-2-4:2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables -- Part 2-4: Procedures - Category C |
HD 405.3 S1:1993 Note 2.1 |
Date expired (1.8.2002) |
|
Cenelec |
EN 50266-2-5:2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables -- Part 2-5 Procedures - Small cables - Category D |
||
|
Cenelec |
EN 50267-1:1998 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables -- Part 1: Apparatus |
HD 602 S1:1992 Note 2.1 |
Date expired (1.3.2000) |
|
Cenelec |
EN 50267-2-1:1998 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables -- Part 2-1: Proce dures - Determination of the amount of halogen acid gas |
||
|
Cenelec |
EN 50267-2-2:1998 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables -- Part 2-2: Proce dures - Determination of degree of acidity of gases for materials by mea suring pH and conductivity |
||
|
Cenelec |
EN 50267-2-3:1998 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables -- Part 2-3: Proce dures - Determination of degree of acidity of gases for cables by determi nation of the weighted average of pH and conductivity |
HD 602 S1:1992 Note 2.1 |
Date expired (1.3.2000) |
|
Cenelec |
EN 50274:2002 Low-voltage switchgear and controlgear assemblies - Protection against electric shock - Protection against unintentional direct contact with haz ardous live parts |
||
|
Cenelec |
EN 50288-1:2003 Multi-element metallic cables used in analogue and digital communica tion and control -- Part 1: Generic specification |
||
|
Cenelec |
EN 50288-2-1:2003 Multi-element metallic cables used in analogue and digital communica tion and control -- Part 2-1: Sectional specification for screened cables characterised up to 100 MHz - Horizontal and building backbone cables |
||
|
Cenelec |
EN 50288-2-2:2003 Multi-element metallic cables used in analogue and digital communica tion and control -- Part 2-2: Sectional specification for screened cables characterised up to 100 MHz - Work area and patch cord cables |
||
|
Cenelec |
EN 50288-3-1:2003 Multi-element metallic cables used in analogue and digital communica tion and control -- Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz - Horizontal and building backbone cables |
||
|
Cenelec |
EN 50288-3-2:2003 Multi-element metallic cables used in analogue and digital communica tion and control -- Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz - Work area and patch cord cables |
||
|
Cenelec |
EN 50288-4-1:2003 Multi-element metallic cables used in analogue and digital communica tion and control -- Part 4-1: Sectional specification for screened cables characterised up to 600 MHz - Horizontal and building backbone cables |