| In Chinese and English | Norma Armonizada |
| 灯杆 第5部分：钢制灯杆的要求Lighting columns. Requirements for steel lighting columns | UNE-EN 40- 5:2003 |
| 灯杆.第6部分:铝制灯杆的要求 | UNE-EN 40- 6:2003 |
| 灯柱.第7部分:纤维增强聚酯复合灯柱的要求 | UNE-EN 40- 7:2003 |
| 灯柱.第4部分:钢筋混凝土和预应力混凝土灯柱的要求Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns | UNE-EN 40-4 |
| 火灾探测和火灾警报系统 第2部分：控制和指示设备Fire detection and fire alarm systems - Part 2: Control and indicating equipment; Amendment A1 | UNE EN 54-2 |
| 火灾探测和火灾警报系统.第3部分:火灾警报系统的发声器.修改件A1(Fire detection and fire alarm systems - Part 3: Fire alarm devices; Sounders; Amendment A1; German version EN 54-3:2001/A1:2002) | UNE-EN 54- 3:2001+ A1:2003+A2:2007 |
| 火灾探测及报警系统 第5部分:点型感温探测器 | UNE-EN 54- 5:2001+ A1:2002 |
| 火灾探测及报警系统 第7部分:点型感烟探测器 | UNE-EN 54- 7:2001+ A1:2002+A2:2007 |
| 火灾探测及报警系统 第4部分:电源 | UNE-EN 54- 4:1997+ AC:1999+A1:2003+ A2:2006 |
| 烟和热控制系统.挡烟隔板规范Smoke and heat control systems - Specification for smoke barriers | UNE EN 12101-1 |
| 烟和热控制系统.第1部分:烟壁垒规范Smoke and heat control systems - Part 1: Specification for smoke barriers (includes Amendment A1:2006) English version of DIN EN 12101-1:2006-06 | UNE EN 12101-1 |
| 建筑五金件.单轴铰链.要求和试验方法(Building hardware - Single-axis hinges - Requirements and test methods; German version EN 1935:2002) | UNE-EN 1935:2002+ AC:2004 |
| 建筑构件.控制门关闭装置.要求和试验方法(Building hardware - Controlled door closing devices - Requirements and test methods) | UNE-EN 1154:2003 |
| 建筑物五金件.旋转门用电动定位装置.要求和检验方法(Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods (includes amendment A1:2002); German version EN 1155:1997 + A1:2002) | UNE-EN 1155:2003 |
| 建筑五金.门锁调节装置.要求和检验方法(Building hardware - Door coordinator devices - Requirements and test methods (includes amendment A1:2002); German version EN 1158:1997 + A1:2002) | UNE-EN 1158:2003+ AC:2006 |
| 建筑硬件.用工具柄或推焊接点操作紧急出口装置.要求和试验方法Building hardware - Emergency exit devices operated by a lever handle or push pad - Requirements and test methods (includes Amendment A1:2001); German version EN 179:1997 + A1:2001) | UNE-EN 179:1997+ A1:2001+AC/2003 |
| 建筑硬件.用水平棒操作应急出口.要求和试验方法(Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods (includes Amendement A1:2001); German version EN 1125:1997 + A1:2001) | UNE-EN 1125:1997+ A1:2001+AC/2003 |
| 建筑物五金.锁和闩.机械锁、闩和锁板.要求和试验方法 | UNE-EN 12209:2004+ AC:2006 |
| 工业、商业和车库门和大门 产品标准 第1部分：不耐火产品或具有烟控特性的产品Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics | UNE-EN 13241-1:2004 |
| 幕墙-产品标准Curtain Wall | UNE-EN 13830:2004 |
| 门窗.产品标准、性能特征.第1部分:无防漏火和/或烟特征的窗和外人行门具 Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics | UNE-EN 14351-1:2006 |
| 建筑玻璃 夹层玻璃和夹层安全玻璃 合格性评估 | UNE-EN 14449:2006+ AC:2006 |
| 磁砖用胶粘剂.定义和规范 | UNE-EN 12004:2001+ A1:2002+AC:2002 |
| 散热器和对流式暖房规范.第1部分:技术规范和要求Specification for radiators and convectors - Technical specifications and requirements | UNE-EN 442-1:1996+ A1:2004 |
| 吊顶.要求和试验方法 Suspended ceilings - Requirements and test methods | UNE-EN 13964:2005 |
| 高压装饰层压板(HPL) 以热固树脂为基质的板（通常称为层压板） 第7部分：内外墙和天花板装饰用的压制层压板和HPL复合板High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall a | UNE-EN 438-7:2005 |
| 屋顶覆盖物和墙面饰层用混凝土屋面瓦及配件.产品规范 | UNE-EN 490:2005 |
| 天然石料制品.覆面用石板.要求 | UNE-EN 1469:2005 |
| 用于地板，楼梯墙壁和天花板的天然石材的平板模块砖的要求。 | UNE-EN 12057:2005 |
| 天然石材制品.地板和楼梯用板材.要求 | UNE-EN 12058:2005 |
| 柔性防水卷材 防水垫层的定义和要求 第1部分:非连续屋面防水垫层 | UNE-EN 13859-1:2006 |
| 防水用柔性薄板.屋顶防水用增强沥青薄板.定义和特性 | UNE-EN 13707:2005 |
| 防水用柔性薄板材.衬底的定义和特性.第2部分:墙衬 | UNE-EN 13859-2:2005 |
| 防水用薄板.包含塑料和橡胶底层制箱用薄板的塑料和橡胶防潮薄板.定义和特性 | UNE-EN 13967:2005 |
| 防水用柔性薄板.包括沥青底层制箱用薄板的沥青防潮薄板.定义和特性 Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics | UNE-EN 13969:2005 |
| 防水用柔性薄板.沥青水蒸气控制层.定义和特性 | UNE-EN 13970:2005 |
| 防水用柔性薄板.塑料和橡胶蒸气控制层.定义和特性 | UNE-EN 13984:2005 |
| Flexible sheets for waterproofing - Bitumen damp. proof courses - Definitions and characteristics. | UNE-EN 14967:2007 |
| 弹性、纺织和叠层地板覆盖物.基本特性 | UNE-EN 14041:2005+ AC:2007 |
| 拉伸顶棚.要求和试验方法 | UNE-EN 14716:2005 |
| 纤维混凝土石板及配件.产品规范和试验方法Fibre cement slates and fittings - Product specification and test methods; German version EN 492:2004 + A1:2005 + A2:2006 | UNE-EN 492:2005+ A2:2007 |
| 纤维水泥成型薄板及其配件.产品规范和试验方法Fibre-cement profiled sheets and fittings - Product specification and test methods; German version EN 494:2004+A1:2005+A2:2006+A3:2007 | UNE-EN 494:2005+ A2:2007 |
| 石膏板.定义、要求和试验方法 | UNE-EN 520:2005 |
| 中空玻璃 – 第5部分 符合性评价/产品标准 | UNE-EN 1279-5:2006 |
| 非连续铺设的粘土屋面瓦.产品定义和规范 | UNE-EN 1304:2006 |
| 建筑用玻璃.基本钠钙玻璃产品.第9部分:合格性评定/产品标准(2005版) | UNE EN 572-9 |
| 热钢化钠钙硅酸盐玻璃 –第2部分:符合性评价/产品标准 | UNE-EN 12150-2:2005 |
| 建筑玻璃 夹层玻璃和夹层安全玻璃 合格性评估 | UNE-EN 14449:2006+ AC:2006 |
| 特殊的基础产品－硼硅酸盐玻璃－第2部分：符合性评价/产品标准 | UNE-EN 1748-1-2:2005 |
| 建筑玻璃 专用基本产品 第2部分：玻璃陶瓷 合格评定 | UNE-EN 1748-2-2:2005 |
| 建筑物用玻璃.热增强钠钙玻璃.第2部分:合格评价/产品标准 | UNE-EN 1863-2:2005 |
| 化学增强钠钙硅酸盐玻璃 – 第2部分：符合性评价/产品标准 | UNE-EN 12337-2:2005 |
| 热钢化硼硅酸盐玻璃 – 第2部分：符合性评价/产品标准 | UNE-EN 13024-2:2005 |
| 建筑玻璃 碱性碱土硅酸盐玻璃产品 第2部分：合格性评估 | UNE-EN 14178-2:2005 |
| 建筑物玻璃.长时间热处理的热钢化钙钠硅酸盐安全玻璃.合格评定/产品标准 | UNE-EN 14179-2:2006 |
| 热钢化碱土硅酸盐玻璃 – 第2部分：符合性评价/产品标准 | UNE-EN 14321-2:2006 |
| 门窗.产品标准、性能特征.第1部分:无防漏火和/或烟特征的窗和外人行门具 Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics | UNE-EN 14351-1:2006 |
| 石膏块材.定义、要求和试验方法Gypsum blocks - Definitions, requirements and test methods) | UNE-EN 12859:2001+ A1:2004 |
| 石膏块粘和剂-定义，要求和检验方法 | UNE-EN 12860:2001 |
| 建筑物绝热制品.工厂制作的矿棉产品.规范 Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification | UNE-EN 13162:2002+ AC:2006 |
| 建筑物绝热制品.工厂制作的可膨胀聚苯乙烯产品.规范 Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification | UNE-EN 13163:2002+ AC:2006 |
| 建筑物绝热制品.工厂制作的聚苯乙烯泡沫 (XPS)产品.规范 Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification | UNE-EN 13164:2002+ A1:2004+ AC:2006 |
| 建筑物绝热制品.工厂制作的聚亚氨酯(PUR)硬质泡沫塑料产品.规范 Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification | UNE-EN 13165:2002+ A1:2004+ A2:2006+ AC:2006 |
| 建筑物绝热制品.工厂制作的酚泡沫(PF)产品.规范 Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification | UNE-EN 13166:2002+ A1:2004+ AC:2006 |
| 建筑物绝热制品.工厂制作的蜂窝玻璃产品.规范 Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification | UNE-EN 13167:2002+ A1:2004+ AC:2006 |
| 建筑物绝热制品.工厂制作木丝产品.规范 Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification | UNE-EN 13168:2002+ A1:2004+ AC:2006 |
| 建筑物绝热制品.工厂制作膨胀的珍珠岩产品.规范 Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification | UNE-EN 13169:2002+ A1:2004+ AC:2006 |
| 建筑物绝热制品.工厂制作的膨胀软木(ICB)产品.规范 Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification | UNE-EN 13170:2002+ AC:2006 |
| 建筑物绝热制品.工厂制作的木纤维(WF) 膨胀的珍珠岩产品.规范 Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification | UNE-EN 13171:2002+ A1:2004+ AC:2006 |
| 绝热材料和制品 现场制作的膨胀粘土软质集料(LWA) 第1部分：安装前松填制品的规范 Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation | UNE-EN 14063-1:2005 |
| 石膏粘接剂和石膏粉 第1部分：定义和要求 Gypsum binders and gypsum plasters - Part 1: Definitions and requirements | UNE-EN 13279-1:2006 |
| 石膏板接缝刮抹材料 定义、要求和试验方法 Jointing materials for gypsum plasterboards - Definitions, requirements and test methods | UNE-EN 13963:2006+ AC:2006 |
| 再处理的石膏板制品 定义、要求和试验方法 Gypsum plasterboard products from reprocessing - Definitions, requirements and test methods | UNE-EN 14190:2006 |
| 石膏板系统金属框架部件 定义、要求和试验方法 Metal framing components for gypsum plasterboard systems - Definitions, requirements and test methods | UNE-EN 14195:2005+ AC:2006 |
| 带蜂窝纸芯的预制石膏灰泥板面板.定义、要求和试验方法 | UNE EN 13915:2007 |
| 石膏：石膏板的暂停天花板 | UNE EN 14246:2007 + AC 2007 |
| 防水用弹性薄板.屋顶防水用塑料和橡胶薄板.定义和特性 | UNE-EN 13956:2006 |
| 木地板 —特性,合格评估和粘贴标记 | UNE-EN 14342:2006 |
| 结构用轴承 第3部分：弹性轴承 Structural bearings - Part 3: Elastomeric bearings | UNE-EN 1337-3:2005 |
| 建筑用轴承 第4部分：滚子轴承 Structural bearings - Part 4: Roller bearings | UNE-EN 1337-4:2005 |
| 结构用轴承 第5部分：罐形轴承 Structural bearings - Part 5: Pot bearings | UNE-EN 1337-5:2006 |
| 建筑用轴承 第6部分：开合轴承 Structural bearings - Part 6: Rocker bearings | UNE-EN 1337-6:2005 |
| 建筑用轴承 第7部分：球面和柱面聚四氟乙烯轴承 Structural bearings - Part 7: Spherical and cylindrical PTFE bearings | UNE-EN 1337-7:2004 |
| 结构用轴承 第3部分：弹性轴承 Structural bearings - Part 3: Elastomeric bearings | UNE-EN 1337-3:2005 |
| 建筑用轴承 第4部分：滚子轴承 Structural bearings - Part 4: Roller bearings | UNE-EN 1337-4:2005 |
| 结构用轴承 第5部分：罐形轴承 Structural bearings - Part 5: Pot bearings | UNE-EN 1337-5:2006 |
| 建筑用轴承 第6部分：开合轴承 Structural bearings - Part 6: Rocker bearings | UNE-EN 1337-6:2005 |
| 建筑用轴承 第7部分：球面和柱面聚四氟乙烯轴承 Structural bearings - Part 7: Spherical and cylindrical PTFE bearings | UNE-EN 1337-7:2004 |
| 车辆和行人区的排水通道.分类、设计、试验要求、标记和合格评定 | UNE-EN 1433:2003+ A1:2005 |
| 水泥 第一部分：通用水泥的组成、规格要求和合格评定准则 | UNE-EN 197-1:2000 |
| 水泥 第1部分：普通水泥的成分、规范和合格判据 | UNE-EN 197-1:2000/A1: 2005 |
| 水泥第4部分:低强度快硬高炉水泥的组分、规范和合格标准 | UNE-EN 197-4:2005 |
| 圬工用水泥.试验方法Masonry cement - Test methods | UNE-EN 413-1:2005 |
| 水泥.超低热专用水泥的组分、规范和合格标准 | UNE-EN 14216:2005 |
| 铝酸盐水泥：组成、分类和合格规则 | UNE-EN 14647:2006 |
| Aggregates for concrete | UNE-EN 12620:2003+ AC:2004 |
| 沥青混合物用集料以及道路、飞机场和其他交通区域表面处理(Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas | UNE-EN 13043:2003+ AC:2004 |
| 轻集料.第1部分:混凝土、灰浆和水泥浆用轻集料(Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout; German version EN 13055-1:2002) | UNE-EN 13055-1:2003+ AC:2004 |
| 灰浆用集料 Aggregates for mortar | UNE-EN 13139:2003+ AC:2004 |
| 水磨石.第1部分:规范 Armourstone - Part 1: Specification | UNE-EN 13383-1:2003+ AC:2004 |
| 道碴集料 Aggregates for railway ballast | UNE-EN 13450:2003+ AC:2004 |
| 民用工程和道路建设用非粘合和液压粘合混合料的集料 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction | UNE-EN 13242:2003+ AC:2004 |
| 轻集料.第2部分:沥青混合料和表面处理用轻集料以及非粘结和粘结用轻集料(Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout; German version EN 13055-1:2002) | UNE-EN 13055-2:2005 |
| 砌筑用砂浆规范.第2部分:砌筑砂浆(Specification for mortar for masonry - Part 2: Masonry mortar; German version EN 998-2:2003) | UNE-EN 998-2:2004 |
| 砌块规范.第1部分:粘土砌块Specification for masonry units - Part 1: Clay masonry units; German version EN 771-1:2003) | UNE-EN 771-1:2003+ A1:2005 |
| 砌体砌筑单元规范.第2部分:硅酸盐砌体砌筑单元 | UNE-EN 771-2:2005+ A1:2005 |
| 砌块规范 第3部分：聚合混凝土砌块（密集和轻质聚合） | UNE-EN 771-3:2004+ A1:2005 |
| 砌块规范.第4部分:高压蒸氧加气混凝土砌块 | UNE-EN 771-4:2004+ A1:2005 |
| 砌块规范 第5部分：人造石料砌块 | UNE-EN 771-5:2005+ A1:2005 |
| Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling 混凝土、灰泥及水泥浆混合物-部分2:混凝土混合物-定义、要求、合格性、标志及标签 | UNE-EN 934-2:2002+ A1:2005+A2:2006 |
| 混凝土、砂浆和灌浆用添加剂.第4部分:预应力钢筋束用添加剂.定义、要求、符合性、标记和标签 Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling | UNE-EN 934-4:2002 |
| 混凝土、砂浆和灰浆用外加剂.第3部分:砂浆外加剂.定义、要求、一致性、标记和贴标签 Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity, marking and labelling | UNE-EN 934-3:2004+ AC:2005 |
| 透空结构的轻骨料混凝土预制增强构件 | UNE-EN 1520:2003+ AC:2004 |
| 预制混凝土产品.空芯板 | UNE-EN 1168:2006 |
| 预制混凝土基桩:Precast concrete foundation piles | UNE-EN 12794:2006 |
| 预制混凝土产品：电线杆和柱 | UNE-EN 12843:2005 |
| 预制混凝土 肋构盖板(包含2007年的第一次补充件) Precast concrete products - Ribbed floor elements | UNE-EN 13224:2005+ AC:2005 |
| 预制混凝土制品 棒状构件 Precast concrete products - Linear structural elements | UNE-EN 13225:2005 |
| 预制混凝土 专用屋顶构件 Precast concrete products - Special roof elements | UNE-EN 13693:2005 |
| 预制混凝土制品 落地系统用地板 第1部分:普通要求 Precast concrete products - Floor plates for floor systems | UNE-EN 13747:2006 |
| 预制混凝土产品.预制混凝土汽车库.第1部分:房屋尺寸大小的整体式或单块组成的加筋车库的要求Precast concrete products - Precast concrete garages - Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions; | UNE-EN 13978-1:2006 |
| 预制混凝土产品.楼梯 | UNE EN 14843:2007 |
| 预制混凝土产品.箱涵 | UNE EN 14844:2007 |
| 预制混凝土制品.地基元素 | UNE EN 14991: 2007 |
| 预制混凝土制品.墙基础 | UNE EN 14992:2007 |
| 预制混凝土制品.桥梁基础 | UNE EN 15050:2007 |
| 沥青混合物.材料规范.第1部分:沥青混凝土Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete; | UNE-EN 13108-1:2007 |
| 沥青混合物.材料规范.第2部分:极薄层沥青混凝土Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers; English version of DIN EN 13108-2:2006-08 | UNE-EN 13108-2:2007 |
| 沥青混合物 材料规格 第3部分：软沥青 | UNE-EN 13108-3:2007 |
| Bituminous mixtures - Material specification - Part 4: Hot rolled asphalt | UNE-EN 13108-4:2007 |
| 沥青混合物 材料规格 第5部分：砂石沥青脂 | UNE-EN 13108-5:2007 |
| 沥青混合物 材料规格 第6部分：沥青脂 | UNE-EN 13108-6:2007 |
| 沥青混合物 材料规格 第7部分：多孔沥青（PA） | UNE-EN 13108-7:2007 |
| 防水用柔性薄板.屋顶防水用增强沥青薄板.定义和特性 | UNE-EN 13707:2005 |
| 防水用弹性薄板.屋顶防水用塑料和橡胶薄板.定义和特性 | UNE-EN 13956:2006 |
| 防水用薄板.包含塑料和橡胶底层制箱用薄板的塑料和橡胶防潮薄板.定义和特性 | UNE-EN 13967:2005 |
| 防水用柔性薄板.包括沥青底层制箱用薄板的沥青防潮薄板.定义和特性 Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics | UNE-EN 13969:2005 |
| High-strength structural bolting assemblies for preloading | UNE-EN 14399-1:2006 |
| 交通控制设备.报警和安全灯装置 | UNE EN 12352:2007 |
| 交通控制设备.信号器 | UNE EN 12368:2006 |
| 道路垂直标志.可变信息交通标志.第1部分:产品标准 | UNE EN 12966-1 |
| 包括燃烧固体燃料的开口炉在内的嵌入式设备 要求和试验方法 | UNE EN 13229:2002 + A1+A2/AC:2007 |
| 燃烧固体燃料的房间加热器 要求和试验方法 |
联系我们<<
地 址：济南市高新区龙奥北路1577号
固话：0531-59832125
济南：15806639366 谭经理
邮箱： 15806639366@126.com
建筑产品指令标准
时间：2015-05-06 10:09 来源：未知 点击：